Tag Archives: landing gear

China Custom Trailer Landing Gear for Semi Trailer Parts 28t Landing Gear Trailer Jack bevel gearbox

Product Description

WONDEE Landing gear:

WONDEE landing gear factory was founded in 2003 , to meet market demand better, we keep improving quality management and  successfully certified with ISO9001 quality control system in 2005. 

Further more, We built strong technical force with 8 engineers for this project, they serve for product upgrading and development. 

By the reason of quick Development since 2571, factory current year output is able to reach 60,000 pairs and we offer each of them with one-year warranty service.

 

One-side operation, gearbox outside, common mounting plate, with T-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGH28-A5711T 28000 80000 5.4 0.71 430 794 96 T
LGH28-A5712T 28000 80000 5.4 0.71 480 844 96 T

 

Remark:  T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

 

 

One-side operation, gearbox outside, long mounting plate, with T-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGH28-B5711T 28000 80000 5.4 0.71 430 794 98 T
LGH28-B5712T 28000 80000 5.4 0.71 480 844 98 T
LGH32-B5711T 32000 90000 5.4 0.71 430 794 105 T
LGH32-B5712T 32000 90000 5.4 0.71 480 844 105 T

 

Remark:  T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

One-side operation, gearbox inside, common mounting plate, with T-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGN24-A5711T 25000 60000 5.4 0.71 430 830 90 T
LGN24-A5712T 25000 60000 5.4 0.71 480 880 90 T
LGN28-A5711T 28000 80000 5.4 0.71 430 830 96 T
LGN28-A5712T 28000 80000 5.4 0.71 480 880 96 T

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

 

One-side operation, gearbox inside, long mounting plate, with T-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGN28-B5711T 28000 80000 5.4 0.71 430 780 96 T
LGN28-B5712T 28000 80000 5.4 0.71 480 830 96 T

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

 

 

JOST type, One-side operation, gearbox outside, long mounting plate, with T-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGJ28-B5711T 28000 80000 9 0.9 430 803 100 T
LGJ28-B5712T 28000 80000 9 0.9 480 853 100 T

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

 

 

JOST type, One-side operation, gearbox outside, long mounting plate, with S-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGJ28-B5711S 28000 80000 9 0.9 430 843 110 S
LGJ28-B5712S 28000 80000 9 0.9 480 893 110 S

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

JOST type, One-side operation, gearbox outside, long mounting plate, with T-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGZ28-B5711T 28000 80000 9 0.9 430 803 102 T
LGZ28-B5712T 28000 80000 9 0.9 480 853 102 T

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

JOST type, One-side operation, gearbox outside, long mounting plate, with S-foot:

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGZ28-B5711S 28000 80000 9 0.9 430 803 102 S
LGZ28-B5712S 28000 80000 9 0.9 480 853 102 S

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

JOST type, One-side operation, gearbox outside, long mounting plate, with T-foot:

 

Item No. Capacity Static Load Lifting Speed Lifting Travel Mounting Height Weight Foot Type
High Low
(kg) (kg) (mm/r) (mm/r) (mm) (mm) (kg)
LGJ24-B5711T 24000 50000 9 0.9 430 803 92 T
LGJ24-B5712T 24000 50000 9 0.9 480 853 92 T

 

Remark: T-type/A-type/S-type/R-type landing gear feet are optional according to requirements.

 

Remark:

Other classification of landin gears are available, include Jost type landing gears, Holland type landing gears, BPW types landing gears, Brazilian types landing gears etc.

WONDEE Landing gear QC(Quality control):

Quality is our life. We create our quality system from external requirement and internal improvement.

All landing gears are produced under ISO9001 system and our QC make 100% quality checking for each pair. Further more, our quality inspection is strictly followed by the standard of USA AAR and we are the leader to pass the standard among Chinese suppliers.

On the other hand, our landing gear passed profession lab test include wear-resisting, lifting, static loading and lateral force-resisting etc.

Each CZPT people play important role for quality guarantee and we are proud to the defective rate is less than 0.1%.

WONDEE Landing gear Production Process :


Material Preparing-Cutting-Hole Drilling-Welding-Forming-Painting -Assembling-Packing

WONDEE Landing gear factory facts:

Wondee factory has 15 Years producing experience for landing gear and we keep our focus on exporting market.With steady growth these years, we successfully build long term partner relationship with more than 54 customers all around the world. Besides, we are appointed supplier for CZPT more than 12 years, also serve some trade company in China.
To meet growth demand, we built new workshop and warehouse with 20,000 M2, introduced and upgrade machines more than 100 sets.
Currently, we are able to produce 90% component by ourself and year capacity reach 60,000 pairs.
Further more, we are proactive to improve environmentally friendly equipments to meet government demand and get allowance for long term production then.

Besides Landing gear , WONDEE also Supply trailer parts as below:
 

Semi-trailers:       
Skeletal semi-trailers flatbed semi-trailers container semi-trailers low bed semi-trailers
van semi-trailers fuel tank semi-trailers logging semi-trailers Fence Semi trailers
Spare Parts:      
Leaf spring, flat bar, Chassis, H-beam
Air suspension, mechanic suspension, bogie Coupling,
Axle  air chamber, slack adjuster hitch. 
Brake drum brake shoe brake lining wheel hub
tubeless wheel rims, tube wheel rims, Aluminum wheel rim wheel bolt
u bolt center bolt hub bolt twist lock,
Turntable, 5th wheel,  landing gear, king pin,

After-sales Service: Yes
Warranty: 1 Year
Type: Landing Gear
Certification: ISO/TS16949
Loading Weight: 25T
ABS: Without ABS

Gear

Synthesis of Epicyclic Gear Trains for Automotive Automatic Transmissions

In this article, we will discuss the synthesis of epicyclic gear trains for automotive automatic transmissions, their applications, and cost. After you have finished reading, you may want to do some research on the technology yourself. Here are some links to further reading on this topic. They also include an application in hybrid vehicle transmissions. Let’s look at the basic concepts of epicyclic gear trains. They are highly efficient and are a promising alternative to conventional gearing systems.

Synthesis of epicyclic gear trains for automotive automatic transmissions

The main purpose of automotive automatic transmissions is to maintain engine-drive wheel balance. The kinematic structure of epicyclic gear trains (EGTs) is derived from graph representations of these gear trains. The synthesis process is based on an algorithm that generates admissible epicyclic gear trains with up to ten links. This algorithm enables designers to design auto gear trains that have higher performance and better engine-drive wheel balance.
In this paper, we present a MATLAB optimization technique for determining the gear ratios of epicyclic transmission mechanisms. We also enumerate the number of teeth for all gears. Then, we estimate the overall velocity ratios of the obtained EGTs. Then, we analyze the feasibility of the proposed epicyclic gear trains for automotive automatic transmissions by comparing their structural characteristics.
A six-link epicyclic gear train is depicted in the following functional diagram. Each link is represented by a double-bicolor graph. The numbers on the graph represent the corresponding links. Each link has multiple joints. This makes it possible for a user to generate different configurations for each EGT. The numbers on the different graphs have different meanings, and the same applies to the double-bicolor figure.
In the next chapter of this article, we discuss the synthesis of epicyclic gear trains for automotive automatic transaxles. SAE International is an international organization of engineers and technical experts with core competencies in aerospace and automotive. Its charitable arm, the SAE Foundation, supports many programs and initiatives. These include the Collegiate Design Series and A World In Motion(r) and the SAE Foundation’s A World in Motion(r) award.
Gear

Applications

The epicyclic gear system is a type of planetary gear train. It can achieve a great speed reduction in a small space. In cars, epicyclic gear trains are often used for the automatic transmission. These gear trains are also useful in hoists and pulley blocks. They have many applications in both mechanical and electrical engineering. They can be used for high-speed transmission and require less space than other types of gear trains.
The advantages of an epicyclic gear train include its compact structure, low weight, and high power density. However, they are not without disadvantages. Gear losses in epicyclic gear trains are a result of friction between gear tooth surfaces, churning of lubricating oil, and the friction between shaft support bearings and sprockets. This loss of power is called latent power, and previous research has demonstrated that this loss is tremendous.
The epicyclic gear train is commonly used for high-speed transmissions, but it also has a small footprint and is suitable for a variety of applications. It is used as differential gears in speed frames, to drive bobbins, and for the Roper positive let-off in looms. In addition, it is easy to fabricate, making it an excellent choice for a variety of industrial settings.
Another example of an epicyclic gear train is the planetary gear train. It consists of two gears with a ring in the middle and the sun gear in the outer ring. Each gear is mounted so that its center rotates around the ring of the other gear. The planet gear and sun gear are designed so that their pitch circles do not slip and are in sync. The planet gear has a point on the pitch circle that traces the epicycloid curve.
This gear system also offers a lower MTTR than other types of planetary gears. The main disadvantage of these gear sets is the large number of bearings they need to run. Moreover, planetary gears are more maintenance-intensive than parallel shaft gears. This makes them more difficult to monitor and repair. The MTTR is also lower compared to parallel shaft gears. They can also be a little off on their axis, causing them to misalign or lose their efficiency.
Another example of an epicyclic gear train is the differential gear box of an automobile. These gears are used in wrist watches, lathe machines, and automotives to transmit power. In addition, they are used in many other applications, including in aircrafts. They are quiet and durable, making them an excellent choice for many applications. They are used in transmission, textile machines, and even aerospace. A pitch point is the path between two teeth in a gear set. The axial pitch of one gear can be increased by increasing its base circle.
An epicyclic gear is also known as an involute gear. The number of teeth in each gear determines its rate of rotation. A 24-tooth sun gear produces an N-tooth planet gear with a ratio of 3/2. A 24-tooth sun gear equals a -3/2 planet gear ratio. Consequently, the epicyclic gear system provides high torque for driving wheels. However, this gear train is not widely used in vehicles.
Gear

Cost

The cost of epicyclic gearing is lower when they are tooled rather than manufactured on a normal N/C milling machine. The epicyclic carriers should be manufactured in a casting and tooled using a single-purpose machine that has multiple cutters to cut the material simultaneously. This approach is widely used for industrial applications and is particularly useful in the automotive sector. The benefits of a well-made epicyclic gear transmission are numerous.
An example of this is the planetary arrangement where the planets orbit the sun while rotating on its shaft. The resulting speed of each gear depends on the number of teeth and the speed of the carrier. Epicyclic gears can be tricky to calculate relative speeds, as they must figure out the relative speed of the sun and the planet. The fixed sun is not at zero RPM at mesh, so the relative speed must be calculated.
In order to determine the mesh power transmission, epicyclic gears must be designed to be able to “float.” If the tangential load is too low, there will be less load sharing. An epicyclic gear must be able to allow “float.” It should also allow for some tangential load and pitch-line velocities. The higher these factors, the more efficient the gear set will be.
An epicyclic gear train consists of two or more spur gears placed circumferentially. These gears are arranged so that the planet gear rolls inside the pitch circle of the fixed outer gear ring. This curve is called a hypocycloid. An epicyclic gear train with a planet engaging a sun gear is called a planetary gear train. The sun gear is fixed, while the planet gear is driven.
An epicyclic gear train contains several meshes. Each gear has a different number of meshes, which translates into RPM. The epicyclic gear can increase the load application frequency by translating input torque into the meshes. The epicyclic gear train consists of 3 gears, the sun, planet, and ring. The sun gear is the center gear, while the planets orbit the sun. The ring gear has several teeth, which increases the gear speed.
Another type of epicyclic gear is the planetary gearbox. This gear box has multiple toothed wheels rotating around a central shaft. Its low-profile design makes it a popular choice for space-constrained applications. This gearbox type is used in automatic transmissions. In addition, it is used for many industrial uses involving electric gear motors. The type of gearbox you use will depend on the speed and torque of the input and output shafts.

China Custom Trailer Landing Gear for Semi Trailer Parts 28t Landing Gear Trailer Jack bevel gearboxChina Custom Trailer Landing Gear for Semi Trailer Parts 28t Landing Gear Trailer Jack bevel gearbox
editor by CX 2023-06-08

China Hot selling Jost Semi Trailer Landing Gear worm and wheel gear

Product Description

WONDEE Landing gear:

WONDEE landing gear factory was founded in 2003 , to meet market demand better, we keep improving quality management and  successfully certified with ISO9001 quality control system in 2005. 

Further more, We built strong technical force with 8 engineers for this project, they serve for product upgrading and development. 

By the reason of quick Development since 2571, factory current year output is able to reach 60,000 pairs and we offer each of them with one-year warranty service.

Landing Gear Dimension:

Number Capacity Static Load Speed Lift Height
kg kg Higher Lower mm mm
LGH28-B5711T 28000 80000 3.5 0.42 430 794
LGH28-B5712T 28000 80000 3.5 0.42 480 844
LGH32-B5711T 32000 90000 3.5 0.42 430 794
LGH32-B5712T 32000 90000 3.5 0.42 480 844

WONDEE Landing gear QC(Quality control):

Quality is our life. We create our quality system from external requirement and internal improvement.

All landing gears are produced under ISO9001 system and our QC make 100% quality checking for each pair. Further more, our quality inspection is strictly followed by the standard of USA AAR and we are the leader to pass the standard among Chinese suppliers.

On the other hand, our landing gear passed profession lab test include wear-resisting, lifting, static loading and lateral force-resisting etc.

Each CZPT people play important role for quality guarantee and we are proud to the defective rate is less than 0.1%.

WONDEE Landing gear Production Process :


Material Preparing-Cutting-Hole Drilling-Welding-Forming-Painting -Assembling-Packing

WONDEE Landing gear factory facts:

Wondee factory has 15 Years producing experience for landing gear and we keep our focus on exporting market.With steady growth these years, we successfully build long term partner relationship with more than 54 customers all around the world. Besides, we are appointed supplier for CZPT more than 12 years, also serve some trade company in China.
To meet growth demand, we built new workshop and warehouse with 20,000 M2, introduced and upgrade machines more than 100 sets.
Currently, we are able to produce 90% component by ourself and year capacity reach 60,000 pairs.
Further more, we are proactive to improve environmentally friendly equipments to meet government demand and get allowance for long term production then.

Besides Landing gear , WONDEE also Supply:
 

Semi-trailers:       
Skeletal semi-trailers flatbed semi-trailers container semi-trailers low bed semi-trailers
van semi-trailers fuel tank semi-trailers logging semi-trailers Fence Semi trailers
Spare Parts:      
Leaf spring, flat bar, Chassis, H-beam
Air suspension, mechanic suspension, bogie Coupling,
Axle  air chamber, slack adjuster hitch. 
Brake drum brake shoe brake lining wheel hub
tubeless wheel rims, tube wheel rims, Aluminum wheel rim wheel bolt
u bolt center bolt hub bolt twist lock,
Turntable, 5th wheel,  landing gear, king pin,

Type: Landing Gear
Certification: ISO/TS16949, ISO
Loading Weight: 28t
ABS: Without ABS
Condition: New
Name: Semi Trailer Landing Gear

gear

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has three basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between two shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as eight cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about ten to twenty percent if there is no offset between the two gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between two spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China Hot selling Jost Semi Trailer Landing Gear worm and wheel gearChina Hot selling Jost Semi Trailer Landing Gear worm and wheel gear
editor by CX 2023-06-01

China OEM Manufacture Trailer Parts 28 Ton Trailer Support Leg Electric Landing Gear (08) with high quality

Product Description

 

Company Profile

 

HangZhou Hilite Automobile Areas Co., Ltd., Recognized In 2012, Professional Chinese Supplier Of Trailer Components, Truck Areas And Agricultural Car Components. We Are a Professional & Modern Company Who Specializes In R&D, Production And Sales Of Leaf Spring ,Axles, Suspension,Brake Technique(Relay Valve,Ab muscles…),Tank Trailer Accessories,Etc.

Our Advantages

Our Products Are Mainly Marketed To Southeast Asia, Europe, Central And South The us, The Middle East And Africa. Our Value Is To Gain More Market place Share By Earnings&Worth Delivery Our Customers And Partners. CZPT Areas is Suitable with BP / Fw Equipment, Can Be Few with SINOTRUCK/BENZ/FAW/XIHU (WEST LAKE) DIS.FENG… Vans & Trailers. CZPT Is Fully commited To Offering Client With Skilled And Exact Providers, High-Quality Products with Ample Experiecne. 

OEM & Packing

Solution Description

Hlt Specializes In R&D, Production And Sales Of Auto Leaf Springs, American &German Axles, Leaf Spring Suspensions, Air Suspensions, Hydraulic Suspensions, Rigid Suspensions And Other Sorts Of Suspensions, Single/Double Landing Equipment, Electric Landing Gear, Hydraulic Landing Equipment And A variety of Kinds Of Landing Gear , As Nicely As Tank Trailer Accessories This sort of As Manhole Addresses, Discharge Valves, Subsea Valves, And many others. five hundred,000+ Varieties, One Stop Purchasing For All.

 

Certifications

 

HLT Give Assured Providers For All Products, Respect And Shell out Consideration To The Viewpoints Of Customers And Partners, Such as Customizing And Building New Goods In accordance To Customers’ Demands, Believing Buyer Gratification Is Our CZPT Pursuit. More Than seventy six% Of The Buyers Who Have Used Hilite Items Have Turn into Our Loyal Buyers, Who Have Established An Incredible Brand Result For Us In The Neighborhood Region.

Factory Check out

 

We Would Like To Cooperate With You To Produce A lot more New Bonds In The Future.

FAQ

1Q: CAN YOU DESIGN AND PRODUCE THE PRODUCTS WE WANT?

A:We Have Rich Experience And Strong Technical Support To Design And Produce By Your Samples Or Drawings.Warmly Welcomed For Your Samples Or Drawing.

2Q:WHAT’S THE PROCESS OF PURCHASING ORDERS FROM YOU? 
A:1.Send Us Your Specific Demand,Such As Oem Numbers, Photos, Trailer Models,Ect. 
2.Confirm Our Quotation With Photos And Other Detials.
three.Negotiate About All Details You Need: Packing, Delivery Terms,Guarantee, Ect. 
4.Sign The Contract For The Payment,We Will Make The Production On Time.

3Q.WHAT IS YOUR TERMS OF PAYMENT?
A: T/T 30% As Deposit, And 70% Before Delivery. 
L/C,T/T,D/P, Western Union,Paypal,Money Gram, Others
Photos And Videos Of The Products Will Be Provided Before Your Balance Payment.

4Q :WE WANT TO TRY IN A SMALL QUANTITY AS TRIAL ORDER,BUT LESS THAN YOUR MOQ. WHAT IS YOUR POLICY?
Sample Test And Sample Orders Could Be Accepted If We Have Ready Parts In Stock.

US $80-250
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO/TS16949, ISO
Condition: New
OEM: Yes
Minimal Qty: 1
Sample: Contact with Supplier
Business Type: Manufacture

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $80-250
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO/TS16949, ISO
Condition: New
OEM: Yes
Minimal Qty: 1
Sample: Contact with Supplier
Business Type: Manufacture

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Benefits and Uses of Miter Gears

If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
gear

Spiral bevel gears

Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.

Straight toothed miter gears

Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
gear

Hypoid bevel gears

The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.

Crown bevel gears

The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
gear

Shaft angle requirements for miter gears

Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.

China OEM Manufacture Trailer Parts 28 Ton Trailer Support Leg Electric Landing Gear (08)     with high qualityChina OEM Manufacture Trailer Parts 28 Ton Trailer Support Leg Electric Landing Gear (08)     with high quality
editor by czh 2022-12-16