China Atlas Copco PV271 PV275 Drill Final Drive Gear 2657909376sx 2657909376 57909376 worm and wheel gear

Solution Description

ATLAS Copco PV271 PV275 DRILL Final Travel Equipment 265795716SX   265795716  5795716  gearbox  ,push gear

Travel, Last, ATLASCOP Cost-free WHEELING 265795716SX. PV275. DESCRIPTION Element Quantities. Push, Closing, ATLASCOP Totally free WHEELINGSX.

Atlas copco spare components

Model P/N
Atlas copco 2657752990
Atlas copco 2657755589
Atlas copco 2657760134
Atlas copco 2657760142
Atlas copco 2657760159
Atlas copco 2657765919
Atlas copco 2657771370
Atlas copco 2657794588
Atlas copco 2657798860
Atlas copco 2657799959
Atlas copco 2657803363
Atlas copco 26578 0571 4
Atlas copco 2657805046
Atlas copco 2657806044
Atlas copco 265781571
Atlas copco 2657813347
Atlas copco 2657815938
Atlas copco 2657817470
Atlas copco 2657818585
Atlas copco 2657824120
Atlas copco 2657824237
Atlas copco 2657824286
Atlas copco 2657824575
Atlas copco 2657824732
Atlas copco 2657824773
Atlas copco 2657824781
Atlas copco 2657825580
Atlas copco 2657826273
Atlas copco 2657828931
Atlas copco 2657828949
Atlas copco 2657874596
Atlas copco 265788571
Atlas copco 2657881682
Atlas copco 2657882342
Atlas copco 2657886SX.

 

(SAUER ninety)MPT044/M44 Major PUMP Areas

1,piston shoe,9pcs.

two,cylinder block,1pc.

3,retainer plate,1pc.

4,valve plate RH,1pc.

5,ball manual, 1pc. 

265795716SX 2658565416SX Free WHEELING Free of charge WHEELING. HYDRAULIC C27 JACK Motor CYLINDER ATLAS COPCO PV271 DRILL ATLAS COPCO PV271 & 275 DRILL

If you are fascinated in other components, please get in touch with us!Many thanks!

 

 

US $7,600
/ Piece
|
2 Pieces

(Min. Order)

###

After-sales Service: 1 Year
Warranty: 1 Year
Structure: Axial Plunger Pump
Cylinder Number: Single Cylinder
Drive Mode: Hydraulic Driven Reciprocating Pump
Pump Shaft Position: Horizontal

###

Customization:

###

Brand P/N
Atlas copco 2657752990
Atlas copco 2657755589
Atlas copco 2657760134
Atlas copco 2657760142
Atlas copco 2657760159
Atlas copco 2657765919
Atlas copco 2657771370
Atlas copco 2657794588
Atlas copco 2657798860
Atlas copco 2657799959
Atlas copco 2657803363
Atlas copco 2657803934
Atlas copco 2657805046
Atlas copco 2657806044
Atlas copco 2657810020
Atlas copco 2657813347
Atlas copco 2657815938
Atlas copco 2657817470
Atlas copco 2657818585
Atlas copco 2657824120
Atlas copco 2657824237
Atlas copco 2657824286
Atlas copco 2657824575
Atlas copco 2657824732
Atlas copco 2657824773
Atlas copco 2657824781
Atlas copco 2657825580
Atlas copco 2657826273
Atlas copco 2657828931
Atlas copco 2657828949
Atlas copco 2657874596
Atlas copco 2657880833
Atlas copco 2657881682
Atlas copco 2657882342
Atlas copco 2657886004
Atlas copco 2657889966
Atlas copco 2657900342
Atlas copco 2657909129
Atlas copco 2657909376
Atlas copco 2657910655
Atlas copco 2657914269
Atlas copco 2657926271
Atlas copco 2657927089
Atlas copco 2657927402
Atlas copco 2657927410
Atlas copco 2657927568
Atlas copco 2657935272
Atlas copco 2657935280
Atlas copco 2657990228
Atlas copco 2658003203
Atlas copco 2658006859
Atlas copco 2658008426
Atlas copco 2658015355
Atlas copco 2658025321
Atlas copco 2658027640
Atlas copco 2658027749
Atlas copco 2658027756
Atlas copco 2658028143
Atlas copco 2658028168
Atlas copco 2658190794
Atlas copco 2658254081
Atlas copco 2658257945
Atlas copco 2658266017
Atlas copco 2658266321
Atlas copco 2658312993
Atlas copco 2658313273
Atlas copco 2658313777
Atlas copco 2658323257
Atlas copco 2658323481
Atlas copco 2658324689
Atlas copco 2658324801
Atlas copco 2658324809
Atlas copco 2658324817
Atlas copco 2658324825
Atlas copco 2658324849
Atlas copco 2658324857
Atlas copco 2658324881
Atlas copco 2658324889
Atlas copco 2658330985
Atlas copco 2658331001
Atlas copco 2658331009
Atlas copco 2658331017
Atlas copco 2658331345
Atlas copco 2658331353
Atlas copco 2658331361
Atlas copco 2658331369
Atlas copco 2658331377
Atlas copco 2658337465
Atlas copco 2658339033
Atlas copco 2658341841
Atlas copco 2658342193
Atlas copco 2658342305
Atlas copco 2658343449
Atlas copco 2658355729
Atlas copco 2658355841
Atlas copco 2658356409
Atlas copco 2658356577
Atlas copco 2658356601
Atlas copco 2658356673
Atlas copco 2658356985
Atlas copco 2658357369
Atlas copco 2658357385
Atlas copco 2658357393
Atlas copco 2658357401
Atlas copco 2658357409
Atlas copco 2658357417
Atlas copco 2658357425
Atlas copco 2658357433
Atlas copco 2658357441
Atlas copco 2658357449
Atlas copco 2658357457
Atlas copco 2658357465
Atlas copco 2658357473
Atlas copco 2658363116
Atlas copco 2658363123
Atlas copco 2658385537
Atlas copco 2658403310
Atlas copco 2658413754
Atlas copco 2658413831
Atlas copco 2658414069
Atlas copco 2658414076
Atlas copco 2658414573
Atlas copco 2658414888
Atlas copco 2658414895
Atlas copco 2658427397
Atlas copco 2658427495
Atlas copco 2658427803
Atlas copco 2658449034
Atlas copco 2658450714
Atlas copco 2658463664
Atlas copco 2658466961
Atlas copco 2658468172
Atlas copco 2658468326
Atlas copco 2658471245
Atlas copco 2658539390
Atlas copco 2658539397
Atlas copco 2658551934
Atlas copco 2658555651
Atlas copco 2658560642
Atlas copco 2658573081
Atlas copco 2658573144
Atlas copco 2658575853
Atlas copco 2658579115
Atlas copco 2658607409
Atlas copco 2658607416
Atlas copco 2658607423
Atlas copco 2658607430
Atlas copco 2658607549
Atlas copco 2658607556
Atlas copco 2658607584
Atlas copco 2658607612
Atlas copco 2658607654
Atlas copco 2658607675
Atlas copco 2658607696
Atlas copco 2658607724
Atlas copco 2658607731
Atlas copco 2658607745
Atlas copco 2658607752
Atlas copco 2658611392
Atlas copco 2658620289
Atlas copco 2659436840
Atlas copco 2686376191
Atlas copco 2686385119
Atlas copco 2686385135
Atlas copco 2686490364
Atlas copco 2686634003
Atlas copco 2692707512
Atlas copco 2692707538
Atlas copco 2692708155
Atlas copco 2694169117
Atlas copco 2695002598
Atlas copco 2695002705
Atlas copco 2695003091
Atlas copco 2695003166
Atlas copco 2695003182
Atlas copco 2695018982
Atlas copco 2695024964
Atlas copco 2695030771
Atlas copco 2695034062
Atlas copco 2695037438
Atlas copco 2695038048
Atlas copco 2695043170
Atlas copco 2695048690
Atlas copco 2695076758
Atlas copco 2695086393
Atlas copco 2695089025
Atlas copco 2695097333
Atlas copco 2695147674
Atlas copco 2695147971
Atlas copco 2695156600
Atlas copco 2695187613
Atlas copco 2695188405
Atlas copco 2695188710
Atlas copco 2695201307
Atlas copco 2695201547
Atlas copco 2695209086
Atlas copco 2695209094
Atlas copco 2695213328
Atlas copco 2695219713

###

Description  
US $7,600
/ Piece
|
2 Pieces

(Min. Order)

###

After-sales Service: 1 Year
Warranty: 1 Year
Structure: Axial Plunger Pump
Cylinder Number: Single Cylinder
Drive Mode: Hydraulic Driven Reciprocating Pump
Pump Shaft Position: Horizontal

###

Customization:

###

Brand P/N
Atlas copco 2657752990
Atlas copco 2657755589
Atlas copco 2657760134
Atlas copco 2657760142
Atlas copco 2657760159
Atlas copco 2657765919
Atlas copco 2657771370
Atlas copco 2657794588
Atlas copco 2657798860
Atlas copco 2657799959
Atlas copco 2657803363
Atlas copco 2657803934
Atlas copco 2657805046
Atlas copco 2657806044
Atlas copco 2657810020
Atlas copco 2657813347
Atlas copco 2657815938
Atlas copco 2657817470
Atlas copco 2657818585
Atlas copco 2657824120
Atlas copco 2657824237
Atlas copco 2657824286
Atlas copco 2657824575
Atlas copco 2657824732
Atlas copco 2657824773
Atlas copco 2657824781
Atlas copco 2657825580
Atlas copco 2657826273
Atlas copco 2657828931
Atlas copco 2657828949
Atlas copco 2657874596
Atlas copco 2657880833
Atlas copco 2657881682
Atlas copco 2657882342
Atlas copco 2657886004
Atlas copco 2657889966
Atlas copco 2657900342
Atlas copco 2657909129
Atlas copco 2657909376
Atlas copco 2657910655
Atlas copco 2657914269
Atlas copco 2657926271
Atlas copco 2657927089
Atlas copco 2657927402
Atlas copco 2657927410
Atlas copco 2657927568
Atlas copco 2657935272
Atlas copco 2657935280
Atlas copco 2657990228
Atlas copco 2658003203
Atlas copco 2658006859
Atlas copco 2658008426
Atlas copco 2658015355
Atlas copco 2658025321
Atlas copco 2658027640
Atlas copco 2658027749
Atlas copco 2658027756
Atlas copco 2658028143
Atlas copco 2658028168
Atlas copco 2658190794
Atlas copco 2658254081
Atlas copco 2658257945
Atlas copco 2658266017
Atlas copco 2658266321
Atlas copco 2658312993
Atlas copco 2658313273
Atlas copco 2658313777
Atlas copco 2658323257
Atlas copco 2658323481
Atlas copco 2658324689
Atlas copco 2658324801
Atlas copco 2658324809
Atlas copco 2658324817
Atlas copco 2658324825
Atlas copco 2658324849
Atlas copco 2658324857
Atlas copco 2658324881
Atlas copco 2658324889
Atlas copco 2658330985
Atlas copco 2658331001
Atlas copco 2658331009
Atlas copco 2658331017
Atlas copco 2658331345
Atlas copco 2658331353
Atlas copco 2658331361
Atlas copco 2658331369
Atlas copco 2658331377
Atlas copco 2658337465
Atlas copco 2658339033
Atlas copco 2658341841
Atlas copco 2658342193
Atlas copco 2658342305
Atlas copco 2658343449
Atlas copco 2658355729
Atlas copco 2658355841
Atlas copco 2658356409
Atlas copco 2658356577
Atlas copco 2658356601
Atlas copco 2658356673
Atlas copco 2658356985
Atlas copco 2658357369
Atlas copco 2658357385
Atlas copco 2658357393
Atlas copco 2658357401
Atlas copco 2658357409
Atlas copco 2658357417
Atlas copco 2658357425
Atlas copco 2658357433
Atlas copco 2658357441
Atlas copco 2658357449
Atlas copco 2658357457
Atlas copco 2658357465
Atlas copco 2658357473
Atlas copco 2658363116
Atlas copco 2658363123
Atlas copco 2658385537
Atlas copco 2658403310
Atlas copco 2658413754
Atlas copco 2658413831
Atlas copco 2658414069
Atlas copco 2658414076
Atlas copco 2658414573
Atlas copco 2658414888
Atlas copco 2658414895
Atlas copco 2658427397
Atlas copco 2658427495
Atlas copco 2658427803
Atlas copco 2658449034
Atlas copco 2658450714
Atlas copco 2658463664
Atlas copco 2658466961
Atlas copco 2658468172
Atlas copco 2658468326
Atlas copco 2658471245
Atlas copco 2658539390
Atlas copco 2658539397
Atlas copco 2658551934
Atlas copco 2658555651
Atlas copco 2658560642
Atlas copco 2658573081
Atlas copco 2658573144
Atlas copco 2658575853
Atlas copco 2658579115
Atlas copco 2658607409
Atlas copco 2658607416
Atlas copco 2658607423
Atlas copco 2658607430
Atlas copco 2658607549
Atlas copco 2658607556
Atlas copco 2658607584
Atlas copco 2658607612
Atlas copco 2658607654
Atlas copco 2658607675
Atlas copco 2658607696
Atlas copco 2658607724
Atlas copco 2658607731
Atlas copco 2658607745
Atlas copco 2658607752
Atlas copco 2658611392
Atlas copco 2658620289
Atlas copco 2659436840
Atlas copco 2686376191
Atlas copco 2686385119
Atlas copco 2686385135
Atlas copco 2686490364
Atlas copco 2686634003
Atlas copco 2692707512
Atlas copco 2692707538
Atlas copco 2692708155
Atlas copco 2694169117
Atlas copco 2695002598
Atlas copco 2695002705
Atlas copco 2695003091
Atlas copco 2695003166
Atlas copco 2695003182
Atlas copco 2695018982
Atlas copco 2695024964
Atlas copco 2695030771
Atlas copco 2695034062
Atlas copco 2695037438
Atlas copco 2695038048
Atlas copco 2695043170
Atlas copco 2695048690
Atlas copco 2695076758
Atlas copco 2695086393
Atlas copco 2695089025
Atlas copco 2695097333
Atlas copco 2695147674
Atlas copco 2695147971
Atlas copco 2695156600
Atlas copco 2695187613
Atlas copco 2695188405
Atlas copco 2695188710
Atlas copco 2695201307
Atlas copco 2695201547
Atlas copco 2695209086
Atlas copco 2695209094
Atlas copco 2695213328
Atlas copco 2695219713

###

Description  

Spiral Gears for Right-Angle Right-Hand Drives

Spiral gears are used in mechanical systems to transmit torque. The bevel gear is a particular type of spiral gear. It is made up of two gears that mesh with one another. Both gears are connected by a bearing. The two gears must be in mesh alignment so that the negative thrust will push them together. If axial play occurs in the bearing, the mesh will have no backlash. Moreover, the design of the spiral gear is based on geometrical tooth forms.
Gear

Equations for spiral gear

The theory of divergence requires that the pitch cone radii of the pinion and gear be skewed in different directions. This is done by increasing the slope of the convex surface of the gear’s tooth and decreasing the slope of the concave surface of the pinion’s tooth. The pinion is a ring-shaped wheel with a central bore and a plurality of transverse axes that are offset from the axis of the spiral teeth.
Spiral bevel gears have a helical tooth flank. The spiral is consistent with the cutter curve. The spiral angle b is equal to the pitch cone’s genatrix element. The mean spiral angle bm is the angle between the genatrix element and the tooth flank. The equations in Table 2 are specific for the Spread Blade and Single Side gears from Gleason.
The tooth flank equation of a logarithmic spiral bevel gear is derived using the formation mechanism of the tooth flanks. The tangential contact force and the normal pressure angle of the logarithmic spiral bevel gear were found to be about twenty degrees and 35 degrees respectively. These two types of motion equations were used to solve the problems that arise in determining the transmission stationary. While the theory of logarithmic spiral bevel gear meshing is still in its infancy, it does provide a good starting point for understanding how it works.
This geometry has many different solutions. However, the main two are defined by the root angle of the gear and pinion and the diameter of the spiral gear. The latter is a difficult one to constrain. A 3D sketch of a bevel gear tooth is used as a reference. The radii of the tooth space profile are defined by end point constraints placed on the bottom corners of the tooth space. Then, the radii of the gear tooth are determined by the angle.
The cone distance Am of a spiral gear is also known as the tooth geometry. The cone distance should correlate with the various sections of the cutter path. The cone distance range Am must be able to correlate with the pressure angle of the flanks. The base radii of a bevel gear need not be defined, but this geometry should be considered if the bevel gear does not have a hypoid offset. When developing the tooth geometry of a spiral bevel gear, the first step is to convert the terminology to pinion instead of gear.
The normal system is more convenient for manufacturing helical gears. In addition, the helical gears must be the same helix angle. The opposite hand helical gears must mesh with each other. Likewise, the profile-shifted screw gears need more complex meshing. This gear pair can be manufactured in a similar way to a spur gear. Further, the calculations for the meshing of helical gears are presented in Table 7-1.
Gear

Design of spiral bevel gears

A proposed design of spiral bevel gears utilizes a function-to-form mapping method to determine the tooth surface geometry. This solid model is then tested with a surface deviation method to determine whether it is accurate. Compared to other right-angle gear types, spiral bevel gears are more efficient and compact. CZPT Gear Company gears comply with AGMA standards. A higher quality spiral bevel gear set achieves 99% efficiency.
A geometric meshing pair based on geometric elements is proposed and analyzed for spiral bevel gears. This approach can provide high contact strength and is insensitive to shaft angle misalignment. Geometric elements of spiral bevel gears are modeled and discussed. Contact patterns are investigated, as well as the effect of misalignment on the load capacity. In addition, a prototype of the design is fabricated and rolling tests are conducted to verify its accuracy.
The three basic elements of a spiral bevel gear are the pinion-gear pair, the input and output shafts, and the auxiliary flank. The input and output shafts are in torsion, the pinion-gear pair is in torsional rigidity, and the system elasticity is small. These factors make spiral bevel gears ideal for meshing impact. To improve meshing impact, a mathematical model is developed using the tool parameters and initial machine settings.
In recent years, several advances in manufacturing technology have been made to produce high-performance spiral bevel gears. Researchers such as Ding et al. optimized the machine settings and cutter blade profiles to eliminate tooth edge contact, and the result was an accurate and large spiral bevel gear. In fact, this process is still used today for the manufacturing of spiral bevel gears. If you are interested in this technology, you should read on!
The design of spiral bevel gears is complex and intricate, requiring the skills of expert machinists. Spiral bevel gears are the state of the art for transferring power from one system to another. Although spiral bevel gears were once difficult to manufacture, they are now common and widely used in many applications. In fact, spiral bevel gears are the gold standard for right-angle power transfer.While conventional bevel gear machinery can be used to manufacture spiral bevel gears, it is very complex to produce double bevel gears. The double spiral bevel gearset is not machinable with traditional bevel gear machinery. Consequently, novel manufacturing methods have been developed. An additive manufacturing method was used to create a prototype for a double spiral bevel gearset, and the manufacture of a multi-axis CNC machine center will follow.
Spiral bevel gears are critical components of helicopters and aerospace power plants. Their durability, endurance, and meshing performance are crucial for safety. Many researchers have turned to spiral bevel gears to address these issues. One challenge is to reduce noise, improve the transmission efficiency, and increase their endurance. For this reason, spiral bevel gears can be smaller in diameter than straight bevel gears. If you are interested in spiral bevel gears, check out this article.
Gear

Limitations to geometrically obtained tooth forms

The geometrically obtained tooth forms of a spiral gear can be calculated from a nonlinear programming problem. The tooth approach Z is the linear displacement error along the contact normal. It can be calculated using the formula given in Eq. (23) with a few additional parameters. However, the result is not accurate for small loads because the signal-to-noise ratio of the strain signal is small.
Geometrically obtained tooth forms can lead to line and point contact tooth forms. However, they have their limits when the tooth bodies invade the geometrically obtained tooth form. This is called interference of tooth profiles. While this limit can be overcome by several other methods, the geometrically obtained tooth forms are limited by the mesh and strength of the teeth. They can only be used when the meshing of the gear is adequate and the relative motion is sufficient.
During the tooth profile measurement, the relative position between the gear and the LTS will constantly change. The sensor mounting surface should be parallel to the rotational axis. The actual orientation of the sensor may differ from this ideal. This may be due to geometrical tolerances of the gear shaft support and the platform. However, this effect is minimal and is not a serious problem. So, it is possible to obtain the geometrically obtained tooth forms of spiral gear without undergoing expensive experimental procedures.
The measurement process of geometrically obtained tooth forms of a spiral gear is based on an ideal involute profile generated from the optical measurements of one end of the gear. This profile is assumed to be almost perfect based on the general orientation of the LTS and the rotation axis. There are small deviations in the pitch and yaw angles. Lower and upper bounds are determined as – 10 and -10 degrees respectively.
The tooth forms of a spiral gear are derived from replacement spur toothing. However, the tooth shape of a spiral gear is still subject to various limitations. In addition to the tooth shape, the pitch diameter also affects the angular backlash. The values of these two parameters vary for each gear in a mesh. They are related by the transmission ratio. Once this is understood, it is possible to create a gear with a corresponding tooth shape.
As the length and transverse base pitch of a spiral gear are the same, the helix angle of each profile is equal. This is crucial for engagement. An imperfect base pitch results in an uneven load sharing between the gear teeth, which leads to higher than nominal loads in some teeth. This leads to amplitude modulated vibrations and noise. In addition, the boundary point of the root fillet and involute could be reduced or eliminate contact before the tip diameter.

China Atlas Copco PV271 PV275 Drill Final Drive Gear 2657909376sx 2657909376 57909376     worm and wheel gearChina Atlas Copco PV271 PV275 Drill Final Drive Gear 2657909376sx 2657909376 57909376     worm and wheel gear
editor by czh 2023-01-13